Curved Ramp
Most Important Facts
| Article No. | 74613 |
|---|---|
| Gauge / Design type | H0 / 1:87 |
| Kind | Bridges |
-
Product description
Radius 360 mm / 14-3/16". Curve 30°. Width 64 mm / 1-5/16". For R1 radius C track curved sections. One ramp section is the same length as the 24130 track section.
Find more Märklin explanation videos on our YouTube Channel
Spare parts for our articles can be found here in our spare parts search.
-
Publications
- Product programme 2000 / 2001 - Product programme 2001 / 2002 - Product programme 2002 / 2003 - Product programme 2003/2004 - Product programme 2005 - Product programme 2006 - Product programme 2007/2008 - Product programme 2008/2009 - Product programme 2009/2010 - Product programme 2010/2011 - Product programme 2011/2012 - Product programme 2012/2013 - Product programme 2013/2014 - Product programme 2014/2015 - Product programme 2015/2016 - Product programme 2016/2017 - Product programme 2017/2018 - Product programme 2018/2019 - Product programme 2019/2020 - Product programme 2020/2021 - Product programme 2021/2022 - Product programme 2022/2023 - Product programme 2023/2024 - Product programme 2024/2025
-
Prototype information
The bridge program with the look of steel girders takes C Track into the third dimension. Ramps, approaches and overpasses can be built systematically with these sturdy briges and ramps and the proven 7250 to 7253 pillars. The C Track lies in the bridge and can be slid back and forth, thus enabling you to have a custom installation of the bridges on a layout. The width of the bridges takes into account parallel approaches even in the track spacing used by the wide radius turnout geometry of 64.3 mm / 2-9/16". Suitable bases are available for catenary masts and color lights located in the bridge area.
